New Boiler Installation & Replacement in Stantonbury

• By replacing an old boiler with a new, highly efficient one, you can save up to £640 on your yearly heating bills.
• The costs of a new boiler installation typically range from £1,100 to £5,000, depending on the kind of boiler you choose.
• The costs of a boiler replacement vary depending on the kind of swap you opt for. For a like-for-like combi boiler replacement, you can expect to pay about £1,500 - £4,500. It costs around £1,100 - £5,000 to replace a combi boiler with a system or a conventional boiler.

A new boiler installation can be a great way to reduce heating costs and improve your central heating system performance. The cost of investing in a new boiler can be quite high, ranging anywhere from £1,100 and £5,000. However, it can pay off in the long run, as you’ll be able to notice savings of up to £640 on your yearly heating bills. Selecting one of the best new boilers can be difficult without help. Fortunately, there are many specialists and boiler installers in Stantonbury that can help you in your search for a new boiler.

This is why it’s important to find a boiler companyyou can trust. Ordinarily, this can take days of strenuous searching and comparing prices all on your own but our service can be a great way to avoid all that and be sure that you’ll receive the right person for the job.

How much is a new boiler?

Type of boiler	Cost excluding installation	Cost including installation	Average, inc. installation
Combi	£500 – £3,000	£1,500 – £4,500	£3,000
System	£580 – £3,500	£1,580 – £5,000	£3,290
Conventional	£600 – £3,500	£1,100 – £5,000	£3,050
Electric	£590 – £2,500	£1,590 – £4,000	£2,795
Biomass	£4,000 – £12,000	£6,000 – £21,000	£13,500

When it comes to energy efficiency, combi boilers are the best option. Even though they are compact, they can supply a small household’s taps and radiators without wasting much fuel in the process. However, if your home has more than one bathroom and high heating demands, a combi boiler might not be the right choice. A combi boiler installation in Stantonbury is ideal for smaller households with a single bathroom. While they are highly efficient, combi boilers cannot attend to high energy needs. That is why system or conventional boilers are more suitable for large homes.

A system boiler is more suitable for homes or facilities with higher hot water demands. They are ideal for running multiple hot water taps and showers. System boilers, along with conventional boilers, take up more space than combi boilers. This is due to the need for storage vessels, since they do not provide on-demand hot water. System boilers can be powered by various fuel sources, but the most common choice is natural gas. They can also use LPG (liquefied petroleum gas) or electricity as the energy source.

Conventional boilers consist of a boiler unit, an open-vented hot water cylinder (usually located in the loft), and an expansion tank. The system operates by heating water in the boiler and then storing it in the hot water cylinder. Installing a new conventional boiler in Stantonbury can be fairly easy if you’re replacing an old conventional boiler with a new one. However, if you’re looking to swap a system or combi boiler for a conventional one, be prepared for a lengthier and more complex installation process. This is because the pipework in your home will need to be adjusted and the hot water cylinder and storage tank will need to be fitted.

If you’re interested in a highly-efficient energy system, you’ll want to give some serious thought to electric boilers. They have efficiency ratings of about 99-100%, indicating that very little fuel is wasted in the process of generating heat and hot water for your home. Electricity is one of the most efficient boiler fuel types available, reaching efficiency rates of up to 99-100%. This means that electric boilers waste very little electricity when generating heat for your home, which will help you cut down on your energy bills over time.

As their name suggests, biomass boilers run on fuel such as logs, pellets, or wood chips. They are considered low-carbon heating systems, as they use renewable fuel types to generate heating for your home. While biomass boilers have several impressive advantages, it’s important to note that they are more expensive than any of the other boiler types. At the same time, they take up a lot of space in your home, as the boiler unit is quite large and the fuel needs to be stored in a dry indoor space.

Central heating system installation is influenced by multiple variables, requiring consultations with several Gas Safe certified engineers to determine the precise estimate. This often involves a time-consuming process spanning several days to identify a reliable engineer offering a suitable price. Fortunately, our service can expedite this procedure for you.

The right boiler size for your home

Bedrooms	Radiators	Bathrooms	Boiler size
1-2	0 to 10	1	18 to 27kW
3-4	10 to 15	2 to 3	28 to 34kW
5 or more	15 to 20	4 or more	35 to 43kW

If costs are your main concern, the good news is that there are certain grants that can help you upgrade your home heating system. The Boiler Upgrade Scheme (BUS) has been open since 23rd May 2022 and will run until 2028. Potentially, applicants can receive a grant of up to £5,000 to install a biomass boiler.

• Your boiler was installed over a decade ago.
• You are noticing higher heating costs resulting from decreased efficiency.
• Your boiler is making unusual noises.
• Your boiler often indicates that an error is occurring.
• You are having difficulty finding replacement parts for your old boiler.
• You are noticing that your home is becoming more susceptible to the cold.

If these signs are rearing their ugly heads, it might be time to retire your old boiler and spring for a boiler replacement. Repair costs can become more burdensome than just paying for a new central heating system.

Whether you’re looking for a Baxi or a Worcester Bosch boiler installation in Stantonbury, you’ll still need a pro with reliable credentials and good prices.

As a rule of thumb, when getting a brand new boiler you should ask at least 3 Gas Safe registered engineers. However, finding an engineer you can trust is harder than it seems, with the process often requiring multiple days of research and price comparisons. That’s why we offer a far better way to find the right boiler installer in Stantonbury.