Boilers installation in Edmonton: Find Local Experts

The main types of boilers are combi (including gas combis and electric combis), system boilers, and conventional boilers. Their prices can vary in terms of the boiler replacement cost, efficiency, the parts they use, and the different fuel types they require. Combis tend to be the best in terms of efficiency, with the most efficient combi boiler models reaching up to 98%.

Combi boilers are the most energy-efficient type of boiler. These boilers supply hot water on demand and are ideal for single-bathroom houses with lower hot water consumption. Combi boiler installations in Edmonton are generally electric and gas, although newer fully electric models are getting popular.

However, switching boilers to a combi may not always be the ideal solution. If you have higher water demand, a combi will not be the most viable solution. Similarly, while electric combis have very high efficiencies, this may not necessarily mean lower costs as electricity per kWh can be more expensive than gas in Edmonton.

A system boiler is more suitable for homes or facilities with higher hot water demands. They are ideal for running multiple hot water taps and showers.

System boilers, along with conventional boilers, take up more space than combi boilers. This is due to the need for storage vessels since they do not provide on-demand hot water. System boilers can be powered by various fuel sources, but the most common choice is natural gas. They can also use LPG (liquefied petroleum gas) or electricity as the energy source.

Conventional boilers consist of a boiler unit, an open-vented hot water cylinder (usually located in the loft), and an expansion tank. The system operates by heating water in the boiler and then storing it in the hot water cylinder.

Conventional boilers can run on various fuel sources, including natural gas, oil, or electricity. When it comes to boiler replacements in Edmonton, swapping a conventional for other types is easier than installing one (due to the need for the extra elements and pipework that old heating systems require).

Installing a boiler usually costs between £1,000 and £1,500 ordinarily. The exact price can depend on the complexity of the installation, what type of boiler is being switched out, and whether you require additional parts. Additionally, any gas boiler installation in Edmonton will cost more as it will require a connection to the gas main.

All you have to do is fill out a 30-second form and we’ll do the rest by reaching out to thoroughly vetted installers in Edmonton. You can rest assured that the work will be done at the best available price and you’ll receive a cheap boiler. Click the button below to get started and you’ll receive up to 3 free, non-binding boiler quotes.

Numerous factors can determine the right boiler size for your home:

Of course, these numbers apply to the UK in general, so pinning down the exact rate for every Edmonton household can be difficult. As a rule of thumb, combi boilers are less useful for households with multiple bathrooms as they produce hot water on demand and this stretches their abilities thin when several taps are operating at the same time.

For higher rates of water flow at the expense of a bit of energy efficiency, both system and conventional boilers can do the trick. However, both of these require extra space for additional components like a hot water cylinder. While they are more adept at providing water for homes with more elaborate needs, they could be less suitable for smaller homes with less space.

It’s hard to decide when you should replace your heating system or opt for boiler servicing. Even the strictest regiment of boiler maintenance can’t hold the inevitable at bay. As a general rule, here are a few signs you need to ditch your current heating system:

Here are some of the top boiler manufacturers operating in Edmonton. These prominent names all provide heating solutions across the UK and have a variety of boilers of multiple types and sizes. Many, if not all, of these brands provide extended warranties if the installation is conducted by a fully qualified Gas Safe registered engineer.

All you need to do is fill out a 30-second form and we’ll handle the rest. There are tons of trusted professionals in Edmonton who are up to the task of installing your new central heating system or replacing a boiler. Click the button below to get started and find the cheapest boiler installation in Edmonton from seasoned professionals.